FEIG Electronic Product Range

OBID classic

feig access control terminal Access Control Terminal ID ZK.AB-A
125kHz stand-alone access control terminal for one door, turnstile or barrier. Each identity card can be programmed and erased separately and is suitable for indoors and outdoor.
Datasheet
feig control unit Control Unit ID SE02/2 for proximity multitag-reader ID RW02.ABC-B
Stand-alone control unit for access control of doors. It features, easy administration up to 8 time zones, locking function in case of multiple entries, Anti-passback function, up to 500 - 1000 users
Datasheet
Proximity wandleser

ID RW02.10-AD / -B Proximity - Wandleser

Multitag-Proximity-Wandleser
84.2 x 84.2 x 22 mm Reader, Integrated Antenna

Evaluation Unit The Evaluation Unit ID AWE3000/6000
The intelligent evaluation unit for touchless identification. The evaluation unit ID AWE is delivered in a steel housing with protection IP 64 and is suitable for installation at the wall.
Datasheet
Proximity Reader Module OEM-Lesermodul ID RW01L
125kHz proximity read and write module for integration in control units and terminals for typical applications like identification of persons, access control, time registration, charging systems etc.
Datasheet
Reader Module ID RW01 -A/-B Reader Module
125kHz proximity read and write module. Multitag proximity reader module for identification of 125kHz transponders. Reader has an integrated antenna and a connector for an external antenna.
Datasheet
Proximity multitag reader ID RW02.10 -AD/-B Proximity Multitag Reader
This reader is designed as a wall-mounted device for contactless data exchange with common 125kHz transponders for applications like access control, time attendance and payment systems.
Datasheet
Desktop Reader with USB ID RW40.30-U Desktop Reader with USB
This reader is designed as a desktop device for contactless data exchange with common 125kHz transponders and is suitable for various office administration and industrial applications.
Datasheet
mid-range reader ID RW12.ABC-A/B Midrange Reader
This reader is equipped either with a RS232- and data /clock interface, which can be operated in Wiegand or magnet card emulation, or with a RS485 interface that allows maximum 32 devices per data bus.
Datasheet
Long range reader Housed Long Range Reader
125kHz R/W Reader. Dimensions 296x243x40mm. External Antenna: different sizes and forms. Interfaces: RS232, TTL, Data/Clock, RS485. Power Supply 230V AC
Datasheet
external antennas ID RW24 External Antennas
A large variety of external antennas on offer to best suit the needs of the application.
Back to top

OBID Classic-Pro

Reader Module ID SRP44.02-4S Reader Module with 4 Ram sockets
Features include: Sockets for 4 Security Access Modules. Multitag reader for ISO tags 14443-A & B. Supports NFC Applications, RS232-TTL and USB interface, operation with integrated or external antenna.
Datasheet
Reader Modules ID CRP.M02.VP/AB-B/-BA / ID CRP.M02.VP/AB-C/-CA Reader Modules
Features: 5V and 3.3V variant available, Also available in USB variant, data ranges up to 847 kBits, low power consumption, increased operation speed.
Datasheet
ethernet reader ID CPR50.10-E Proximity Multi-tag Reader with Ethernet Interface
Because of its Ethernet interface according to 10BASE-T / 100BASE-TX standard the reader is well suited for easy integration into an existing LAN environment. The integrated Power over Ethernet (PoE) power supply provides for an easy and secure installation.
Datasheet
USB Desktop Reader USB Desktop Reader ID CPR40.30-USB/-SUSB
13.56MHz Proximity Desktop Reader. Multi-tag Reader for ISO 14443-A and B tags. Desktop reader to be used in offices or at the PoS for applications like ticketing, Payment Systems, eDocument etc
Datasheet
proximity reader modules ID CPR40.0x Proximity Reader Modules
13.56MHz Proximity Read/Write Modules. Features include: integrated or external antenna available, Interfaces: USB, RS232, RS232-TTL, Date/Clock, Weigand, Transponders: ISO 14443-A/-B like MIFARE, MIFRAE Ultra light etc
Datasheet
Access Control Reader ID CPR.03.20-CD Access Control Reader
Features include: Multi-tag Reader for ISO tags 14443-A, -B and ISO 15693, Suitable for indoor and outdoor operation (IP 65), Reader configuration can be changed with a ConfigCard on site, data/clock interface and RS 232-TTL
Datasheet
proximity multitag reader ID CPR02.10-AD/-B Proximity Multitag Reader
13.56MHz Multitag reader for ISO tags 14443-A & -B. Supports NFC applications, suitable for indoor and outdoor use (IP54), Serial Interfaces include (RS232, RS485, Data/Clock)
Datasheet
USB desktop Reader ID CPR.04.P/AB-USB Proximity Desktop Reader
13.56MHz Proximity Desktop reader. Dimensions 145x87x27mm. With integrated antenna. PC/SC driver. Interface; high speed USB 2.0
Datasheet
Back to Top

OBIDi-scan HF

Reader Module ID ISC.M01-A/-B 13.56 MHZ Reader Module
For identification of 13.56MHz Transponders. External Antennas with different sizes available. Interface -A RS232, -B RS232-CMOS, Transponder: ISO 15693/18000-3
Proximity Reader Module ID ISC.M02-B 13.56MHz Proximity Reader Module
Multi-tag proximity reader module for identification of ISO transponders in fields of applications like retail, industry, logistics. Features include, anti-collision function, operation with integrated antenna or external antenna, 2 operation modes: FEIG ISO HOST and Scan-Mode.
Datasheet
Proximity handheld reader ID ISC.PRH101-A Proximity Handheld Reader
The handheld reader identifies transponders with an operating frequency of 13.56MHz. The readers have a maximum reading/writing distance of up to 18cm and are suitable especially for mobile use in connection with a PDA or laptop.
Datasheet
USB handheld reader ID ISC.PRH101-USB 13.56MHz Handheld Reader
Features include, Various interfaces (RS232, USB, Bluetooth), Anticollision function, Multi-tag reader (ISO 15693 and ISO 18000-3 tags) and 2 operation modes: FEIG ISO HOST and Scan-Mode
Datasheet
bluetooth handheld reader ID ISC.PRH101-B 13.56MHz Bluetooth handheld Reader
These readers have a maximum reading / writing distance of up to 18cm and are suitable especially for mobile use in connection with PDA or laptop. PDA or laptop can be used as a mobile host e.g. as data collector.
Datasheet
Proximity handheld reader ID ISC.PRHD102 HF/UHF Handheld Reader
Dimensions 230x80x100, two integrated antennas (HF and UHF), Interfaces: Bluetooth (Serial Port Profile) or USB, Power Supply: Bluetooth variant: Rechargeable accumulators (4xAA - NimH) USB variant: USB - High powered Interface
Datasheet
Proximity Reader ID ISC.PR101-A 13.56MHz Proximity Reader
Note: also available as a module version. The reader has an integrated antenna with a maximum reading / writing distance of up to 18cm. Due to its compact dimensions, the reader is suitable for desk applications.
Datasheet
USB 13.56 proximity Reader ID ISC.PR101-USB 13.56MHz Proximity Reader
The reader's anti-collision function facilitates simultaneous identification of several objects even when they are wrapped.
Datasheet
Mid Range Reader ID ISC.MR101-USB 13.56 MHZ Mid Range Reader
Depending on the used antenna, the reader has the maximum reading distance of up to 40cm. The pad antenna reaches distances of up to 30cm, while the more rugged antenna type is mainly used for applications in industrial surroundings.
Datasheet

		 Housed Mid Range Reader ID ISC.MR100-A 13.56MHz Housed Mid Range Reader
Features include: Anit-collision function, Different antenna types are available, Multi-tag Reader (ISO 15693 and ISO 18000-3 tags) and 2 operation modes: FEIG ISO Host and Scan-Mode
Datasheet
Mid Range Reader ID ISC.MR200-A/E Mid Range Reader
The reader is offered in an aluminum housing with the protection class IP54; for this reason it is protected against dust, dirt and water and can be used in an industrial background. Transmitting power of up to 1.75 watts enables reading ranges up to 70cm
Datasheet
Mid Range Reader ID ISC.MR200-W/EP Mid Range Reader
Features include: Various interfaces (RS232, LAN, WLAN), Power of up to 1.74 enables reading distances up to 70cm. solid plastic housing, Multi-tag reader, Anti-collision function and FEIG ISO Host Mode, Buffered Read Mode, Notification Mode and Scan Mode.
Datasheet
Loop Antenna ID ISC.ANT310/310-A Loop Antenna
With a maximum transmitting power of up to 8 W, the antenna can be operated with several OBID i-san HF readers. Due to the used reader, reading ranges of up to 70cm can be achieved.
Datasheet
PAD Antenna ID ISC.ANT340/240 Pad Antenna for indoor Applications
Suitable to every desk or other document tracking issues. This antenna will operate with every Mid Range Reader with a transmitting power of 1 W
Datasheet
Hanheld Antenna ID ISC.ANTH200/200-A Handheld Antenna
Optimized for operation with OBID i-scan HF Mid range readers, maximum reading distance 30-40cm, 3.6m connection cable, antenna can be used with other 13.56MHz readers with 50 Ohm impedance
Datasheet
Long range reader module ID ISC.LRM2000 Long Range Reader Module
Features include, various antenna configurations with reading ranges up to 2 meters, Buffered Read Mode / Notification Mode / Scan Mode, Multi-tag reader, interfaces: RS232/RS485/LAN/WLAN
Datasheet
HF Long Range Reader ID ISC.LR2000 HF Long Range Reader
Due to the used antennas, the reader has a maximum reading/writing distance up to 2 meters. Therefore being suitable for applications like retail, logistics and industry will call for great reading ranges and anti-collision function facilities.
Datasheet
Crystal Gate ID ISC.ANT1690/600 Crystal Gate
Excellent aisle Width, patented Configuration, transparent design, optional functions, flexible IT integration, Remote Maintenance and self diagnostics and international approval.
Datasheet
Solid gate ID ISC.ANT1700/740 Solid Gate
Real 3D Detection, Aisle width up 1.5m, Aisle width complies with ADA requirements, DVD and CD detection.
Datasheet
Clear Gate ID ISC.ANT1700/740 Clear Gate
Interfaces: RS232, RS485, Ethernet, W-Lan. Alternative: Stand alone mode, software libraries for Windows, Linux, Java. Remote maintenance and diagnostics, integration of customer-specific software directly on the reader.
Datasheet
Single Loop Antenna ID ISC/ANT800/600-DA Single Loop Antenna for industrial environment
Suitable for identification of persons and objects. Reading range up to 80cm - as gate solution, up to 200cm. Easy setup due to integrated dynamic antenna tuner, Radio licenses according to ETSI and FCC.
Datasheet
Clear Gate IID ISC.ANT1300/680 Clear Gate
Low cost version with excellent 3D read rates, gate width up to 1.2m, Automatic antenna tuning, Gate solutions with up to 4 aisles with one reader, sound alarm, volume adjustable.
Datasheet
Dynamic Antenna Tuning Board ID ISC.DAT Dynamic Antenna Tuning Board
Dynamic antenna tuning board for automatic calibration and tuning of RFID antennas with an operating frequency of 13.56MHz
Datasheet
Antenna Power Splitter ID ISC.ANT.PS-B Antenna Power Splitter
The use of a power splitter facilitates the connection of several antennas to one reader. Supports Dynamic Tuning.
8 Channel Multiplexer IID ISC.ANT1300/680 Clear Gate
8 Channel Multiplexer for OBID i-scan readers with external antenna connection for operation of several single or gate antennas with only one reader.
Datasheet
Back to top

OBID i-scan UHF

UHF Antenna ID ISC.ANTU250/250-EU/FCC UHF Antenna
This antenna is circular polarized for operating frequencies in the UHF ranges 865-868MHz (EU Antenna) and 902-928 MHz (FCC antenna)

Datasheet
8 channel UHF multiplexer ID ISC.ANT.UMUX 8 Channel UHF Multiplexer
The 8 channel UHF Antenna Multiplexer is used for switching of RFID antennas with operating frequencies from 860-960MHz. Several antennas can be operated with only one reader.
Datasheet
Fixed UHF Long Range Reader ID ISC.LRU3000/LRU3500 Fixed UHF Long Range Reader
REading ranges up to 10m. Power over ethernet (PoE), 4 Antenna Port indicators, USB host for WLAN dongle or memory stick, acc with linux operating system, 4 different reader modes, RSSI Data Readout.
Datasheet
Fixed UHF Long range reader unit ID ISC.LRMU2000 Fixed UHF Long Range Reader Unit
Both devices, Fixed long range reader and fixed long range reader unit, have identical RF performances. The 2000-B differs from the 2000-A in terms of housing, interface options and functionality for the host connectivity to the device.

Datasheet
fixed UHF RFID Long Range Reader ID ISC.LRU2000i Fixed UHF RFID Long Range Reader with Integrated Antenna
Features include: a highly sensitive receiver that increases the tag detection range, RF front end with blocking features, reader protection against various fault conditions, reader available in different versions.
Datasheet
stand alone vehicle access control ID MAX.U2000 UHF Stand Alone vehicle Access Control System
Stand alone system including RFID-Reader, Antenna, Software and Accessories. Read ranges up to 5m with passive, maintenance free transponders, database capacity for up to 6000 vehicles.
Datasheet
Compact UHF Mid range reader ID ISC.MRU200i Compact UHF Mid Range Reader with integrated Antennas
RFID Multi Protocol Mid Range Reader for identification of UHF transponders (865-928 MHz) especially in process control and automatisation

Datasheet
fixed UHF Mid range reader ID ISC.MRU200 Fixed UHF Mid Range Reader
Features include: wide variety of ETSI and FCC certified antenna configurations with reading ranges depending on the RF transmitting power, Multi-tag reader, high speed anti collision function, connection of one or two external antennas
Datasheet
UHF Short Range Reader Module ID ISC.MU02.02 UHF Short Range Reader Module
Features include: high performance, small size, 860-960 MHZ, integrated multiplexer, 2 antenna outputs, different power modes, low current consumption, shut down pin and 4 different interfaces.
Datasheet
HF/UHF Handheld Reader ID ISC.PRHD102 HF/UHF handheld Reader
Reintegrated HF and UHF Antenna, bluetooth or USB interface, anti-collision function, low power mode for limitation reading distance within the UHF range, battery powered via USB interface and 2 operation modes.

Datasheet
Back to Top

OBID megalock

OBID megalock-l ID ML.B-LL(R) OBID megalock-l
Easy to operate, battery powered transponder locker with high battery durability. It has flexible, programmable access authorization by free or fixed assignment of lock and megaKey.
Datasheet
megelock programmer ID ML.PRG-A megalock Programmer
Desk Unit for programming the "megakeys". megalock Programmer is the electronic, key milling machine with LCD-display and keyboard. The programmer can be menu driven and may also be used for the administration of small megalock units.
Datasheet
megalock terminal ID ML.IT-A Infoterminal for megalock-l
The megalock-l Infoterminal is usually used as an interface between user and locker system. Features include: clear user interface, easy mounting, variable power supply, less power consumption, high reading ranges.
Back to Top
 


Feig logo
Feig OBID logo

 

 

 

 

 

 

 

feig module

glass gates

 

 

 

 

 

 

 

 

 

 

 

feig ilocker

Feig RFID reader

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 


 

 

 

 
Website Last Updated: December, 2010
   
 
  Electro-Com is the official distribution partner for Texas Instruments TI-RFID™ 
Feig logo
 
     
RFID Hardware | RFID Tags | RFID Readers | RFID Asset Tracking | Contactless Smartcard | Proximity Readers
Proximity Cards | Access Control | Wristbands | Security Wristbands | Electronic Door Locks
Electro-Com (Aust)
12 Bastow Place, Mulgrave VIC 3170
PO Box 190 Mt Waverley, VIC 3149
Ph: 1300 130 806 Fax: 1300 130 807
email: sales@electrocom.com.au
www.electrocom.com.au | www.rfid.com.au